MikroTik basic reconfiguration
In case you have access to MikroTik device without UI available, only CLI then you possibly would like to know how to do some basic reconfiguration to gain access to admin panel listening on local network. So… to change user password:
/user set admin password=mynewpassword
To see all the configuration:
export
To create PPTP VPN:
ip pool add name=PPTP-Pool ranges=192.168.99.10-192.168.99.200
ppp profile add change-tcp-mss=yes local-address=PPTP-Pool name=PPTP-Profile only-one=yes remote-address=PPTP-Pool use-encryption=yes dns-server=8.8.8.8,9.9.9.9
ppp secret add name=user1 password=YourPassword profile=PPTP-Profile
interface pptp-server server set authentication=chap,mschap1,mschap2 default-profile=PPTP-Profile enabled=yes
To adjust firewall for PPTP VPN:
ip firewall filter add chain=input comment="PPTP VPN" dst-port=1723 protocol=tcp
ip firewall nat add chain=srcnat out-interface=ether1 action=masquerade
interface pptp-server add name=pptp-user1 user=user1
To enable HTTP web configuration:
ip service print
ip service set www port=81
ip service www address=0.0.0.0/0
Now, once you connect thru PPTP VPN to the remote host, you can access UI. But if you set 0.0.0.0/0 as an address then you may also be able to connect to it using public address.